230 tonne class | Riverina
250t crane hire Riverina
Looking for a 250 t crane in the Riverina? Three of our four Liebherr LTM 1230-5.1s are based at Wagga Wagga. They are rated 230 tonnes, with a 75 m boom, and we quote them at their true rating.
230 T
Rated capacity
75 M
Main boom
3
Based at Wagga Wagga
230 tonne class
Three 230 t cranes at Kooringal
If you are searching for 250 t crane hire in the Riverina, our nearest match is the Liebherr LTM 1230-5.1. Its manufacturer's rating is 230 t, so that is the number we use, because a lift plan only works with the true number.
Three of our four LTM 1230-5.1s are based at Wagga Wagga, each with a 75 m boom on five axles. Ask us about tandem lifts, which we engineer in-house and run with our own lift supervisors.
For loads beyond 230 t, our 350 t Liebherr LTM 1350-6.1 is also based at Wagga Wagga. See heavy lift cranes.
At a glance
Liebherr LTM 1230-5.1
CraneLiebherr LTM 1230-5.1
Rated capacity230 t
Main boom75 m
Axles5
At Wagga Wagga3 of our 4
OperatorAlways included
The crane
Liebherr LTM 1230-5.1
Liebherr LTM 1230-5.1 | 5 axles | Superior Cranes livery
Rated capacity
230t
Main boom
75m
Axles
5
In the fleet
4
Based at
Brisbane + Wagga
Supplied with
Operator
Typical work
What a 230 t crane lifts
Heavy plant and tanks
Vessels, tanks, presses and process equipment for industrial sites.
Tandem lifts
Two-crane lifts, engineered in-house and run by our lift supervisors.
Large precast and steel
Heavy panels and steel assemblies for big builds.
Renewable and energy projects
Substations, transmission works and renewable projects.
Tower crane erection
Erecting and dismantling tower cranes for builders.
Bridges and rail crossings
Super-T and girder installs and removals.
A genuine Superior Cranes lift plan
Working radius
Slew path
Exclusion zones
Where it sits
Is this the right size?
Rated capacity is a ceiling, not a promise at every radius. If the 230 t chart does not cover your load at your radius, the 350 t LTM 1350-6.1, also at Wagga Wagga, is the next step up.
200T
1 in fleet | WGA
72 m of telescopic boom for heavy and high lifts.
All-terrain slew crane5 axles72 m boom
230T
4 in fleet | BNE + WGA
The strongest five-axle class in our fleet, with a 75 m boom. Four units across both depots.
All-terrain slew crane5 axles75 m boom
350T
1 in fleet | WGA
Our largest crane. Up to 130 m of tip height and 92 m of radius with the luffing jib.
All-terrain slew crane6 axles70 m boom
Other crane sizes
Before you book
What to send us
Four things let us size the crane and quote. Photos help with all of them.
01
The load
Its weight including rigging gear and any spreader beam, its size and its lifting points. Drawings help.
02
The reach and height
How far out from the crane the load must be placed, and how high. Mark the start and end points on a photo or site plan.
03
The site and ground
Address or paddock access, ground bearing, space for outriggers and counterweight, and how a five-axle crane gets in.
04
The date and permits
When you need it, and any possession or shutdown window. Permits for the crane and counterweight can take time, so call early.
Questions
250t class crane hire in the Riverina
Do you have a 250 t crane in the Riverina?
Not one rated at 250 t. Our largest five-axle crane is the Liebherr LTM 1230-5.1, rated 230 t, and our 350 t LTM 1350-6.1 is also based at Wagga Wagga. We quote every crane at its true rating.
How many 230 t cranes are based in Wagga Wagga?
Three of our four LTM 1230-5.1s work from our Kooringal yard. The fourth is in Brisbane.
Can you do a tandem lift with two cranes?
Yes. Multi-crane lifts are engineered in-house and run by our lift supervisors. Call early so the plan, the cranes and the crews line up.
How far ahead should I book a 230 t crane?
As early as you can. Heavy lifts usually need a site visit, a lift study and, for the counterweight, transport planning. Call (02) 6925 2556 to start.
Do you cover the whole Riverina?
Yes. We work across the Riverina, the South West Slopes, the Snowy Valleys and the Central West, and further for larger projects. See our Riverina crane hire page.
How much does 250t class crane hire cost in the Riverina?
It depends on the hours, the crew, any permits and how the crane has to be set up. Most jobs have a minimum hire. Send us the details for a fixed, itemised quote.
Google reviews
★★★★★
“Lincoln and crew are prompt and professional. ... They put our mind at ease and got everything set up, made sure they had all the necessary information from the vendors and took steps to mitigate potential mishaps. Everything went smoothly in the end and we couldn't be happier.”
Jim Logan
Guides
Read before you hire
Hiring a crane
With various crane types available, each designed for specific applications, understanding how to match the crane to your project requirements is...
2 min read
Safety & lift planning
A crane counterweight is a heavy block of steel, concrete, or cast iron fitted to the back of a crane to balance the weight of the load being lifted....
4 min read
Safety & lift planning
Heavy lifting is a critical part of many construction projects, but it comes with significant risks if not planned properly. From safety concerns to...
3 min read
Let’s talk about your next project
Ready to lift 24/7
Brisbane | QLD
(07) 3184 0978
324 New Cleveland Rd, Tingalpa QLD 4173
Wagga Wagga | NSW
(02) 6925 2556
35-39 Copland St, Kooringal NSW 2650