100 tonne class | Brisbane
100t crane hire Brisbane
Our Liebherr LTM 1100-4.2 is a 100 tonne all-terrain crane with a 60 m main boom on four axles. It is based in Brisbane, supplied with an operator and planned by our in-house lift engineer.
100 T
Rated capacity
60 M
Main boom
4
Axles
100 tonne class
Long reach on four axles
The LTM 1100-4.2 is the crane for lifts that need reach and height more than brute capacity. Its 60 m main boom on four axles gives long reach without the set-up of a five-axle crane.
It is a good match for structural steel and roof plant, precast panels, and plant and machinery installs: loads too heavy or too far out for a 70 t crane that still do not need a heavy lift crane.
We have one LTM 1100-4.2, so for a particular date call early. If it is booked we will tell you what else we can send.
At a glance
Liebherr LTM 1100-4.2
CraneLiebherr LTM 1100-4.2
Rated capacity100 t
Main boom60 m
Axles4
Based atBrisbane (Tingalpa)
OperatorAlways included
The crane
Liebherr LTM 1100-4.2
Liebherr LTM 1100-4.2 | 4 axles | Superior Cranes livery
Rated capacity
100t
Main boom
60m
Axles
4
In the fleet
1
Based at
Brisbane
Supplied with
Operator
Typical work
What a 100 t crane lifts
Structural steel and roof plant
Beams, columns and air conditioning plant lifted up and over a building, with the boom reaching where a smaller crane cannot.
Machinery and plant installs
Presses, tanks and plant lifted into sheds and plant rooms, inside and out.
Precast and building modules
Panels and modules placed on slabs and footings.
Civil and bridge works
Culvert units, barriers, pits and beams within the crane's chart.
Utilities and water
Plant and equipment for substations and treatment plants.
Night and shutdown lifts
Retail, rail and plant shutdown lifts outside normal hours. We take bookings 24/7.
Where it sits
Is this the right size?
A bigger number is not always better. Capacity falls as the boom goes out, so the right crane is the one whose chart covers your load at your radius. If the 70 t chart covers your lift, you do not need the 100 t. If the 100 t chart only just covers it, look at the 150 t.
70T
3 in fleet | BNE + WGA
Four-axle workhorse with strong charts at radius.
All-terrain slew crane4 axles50 m boom
100T
1 in fleet | BNE
60 m main boom on four axles. Long reach without the set-up of a five-axle crane.
All-terrain slew crane4 axles60 m boom
150T
1 in fleet | BNE
Five-axle heavy lifter for precast, bridge beams and plant installs.
All-terrain slew crane5 axles60 m boom
Other crane sizes
Before you book
What to send us
Four things let us size the crane and quote. Photos help with all of them.
01
The load
Its weight including rigging gear, and its size and shape. If you are not sure of the weight, say so and we will help work it out.
02
The reach and height
How far out from the crane the load must be placed, and how high. This sets the crane size more than weight does.
03
The site
Address, access for a four-axle crane, ground conditions and any overhead lines.
04
The date
When you need the lift, and whether it has to happen at night or outside normal hours.
Questions
100t crane hire in Brisbane
How much can a 100 t crane actually lift?
Its full 100 t rating is only available close in, with the boom short. Capacity falls as the boom extends and the load moves out. Send us the weight and the radius and we will check them against the load chart. Our guide How to read a crane load chart explains why.
Which crane is your 100 t crane?
The Liebherr LTM 1100-4.2, a four-axle all-terrain crane with a 60 m main boom. Its page has the specs and the load chart: Liebherr LTM 1100-4.2.
Is the 100 t crane based in Brisbane?
Yes. It works from our Tingalpa yard. We have one, so call early for a specific date.
Does the crane come with an operator?
Yes. Every Superior crane is hired with an experienced operator. We can add doggers, riggers and lift supervision when the lift needs them.
What if I need more than 100 t?
Our Grove GMK5150L (150 t) and a Liebherr LTM 1230-5.1 (230 t) are also based in Brisbane. See 150t crane hire and heavy lift cranes.
How much does 100t crane hire cost in Brisbane?
It depends on the hours, the crew, any permits and how the crane has to be set up. Most jobs have a minimum hire. Send us the details for a fixed, itemised quote.
Google reviews
★★★★★
“Have used Superior for years. Have never let us down. They show up on time and get the job done safely and efficiently. Professional outfit with a team of down to earth blokes. Would highly recommend.”
S. Thong
Guides
Read before you hire
Cranes explained
When you are hiring a crane, it is important to make sure that you order the correct size. If you order a crane that is too small, it will not be...
2 min read
Cranes explained
In the dynamic world of construction and heavy lifting, having the right equipment can make all the difference. The all terrain crane has become the...
3 min read
Safety & lift planning
Operating a crane safely and efficiently requires a deep understanding of its capabilities. One essential tool for crane operators and riggers is the...
4 min read
Let’s talk about your next project
Ready to lift 24/7
Brisbane | QLD
(07) 3184 0978
324 New Cleveland Rd, Tingalpa QLD 4173
Wagga Wagga | NSW
(02) 6925 2556
35-39 Copland St, Kooringal NSW 2650